What’s included:

• Watch
• Band
• Charging cable
• Manual 

If you haven’t already - Download the Bridger Watch App in the Apple App or Google Play Store and create your profile. 

Powering on for the first time:

• *Note* Wait to power on your watch until you have your preferred wifi network available
• Press and hold the upper right, “Select”, button for 7 seconds to power on your watch. If the screen does not illuminate, connect your watch to power with the charging cable to trigger start up. 

Button Basics and Navigating in your Watch 

• https://www.youtube.com/watch?v=-mfnVAVPThA

Button Layout: 

• Upper Right: Select / Start
• Lower Right: Back
• Upper Left: Up / Zoom In (Maps)
• Lower Left: Down / Zoom Out (Maps)

To put your watch to sleep simply cover the screen with your palm 

Wake your watch by pressing any external button or raising your wrist to as if you are looking at the screen

Pairing Instructions:

First — if you haven’t already, download the app:

Android: https://play.google.com/store/apps/details?id=com.bridgerwatch.app&pcampaignid=web_share

iOS: https://apps.apple.com/us/app/bridger-watch/id6747764502

Quick note on setting up your account: Currently, there are two small tricks you need to know.

1. From the home screen of the app, select “Download Map”, enter your phone number, then tap “Create Account.”
2. After creating your password, the app will ask for a 6-digit code via text. Enter 4242 (yes—just 4 digits) to authenticate and continue setup.

Before you power on your watch:
For a smoother setup, we recommend waiting until you’re near your preferred Wi-Fi network and have the password handy.

Getting your watch set up:

• Press and hold the upper right (Select) button for ~7 seconds to power on. If nothing happens, plug it into the charger to trigger startup
• Tap Continue
• When prompted to pair your phone, press the upper right button to confirm
• You’ll see a QR code on the watch - Important: This must be scanned from the Bridger Watch app (not your phone’s camera)

To scan the QR code:

• Open the Bridger Watch app
• Go to the Settings tab (bottom right)
• Tap “Pair Watch” → “Go to My Camera”
• Scan the QR code on your watch
• A number will appear on both your watch and phone — confirm they match and select “Yes, it matches”
• When prompted, allow Bluetooth pairing
• Allow notifications when prompted

You’re now paired.
Next, the app will prompt you to set up Wi-Fi — don’t skip this step.

• Select your network
• Enter your password and tap Connect

Note: If needed, you can turn Wi-Fi on from the watch control panel after pairing — your network info will already be saved.

From there, you’ll enter a few details (height, weight, DOB, wrist preference) to optimize your health metrics.

And that’s it — you’re up and running.

Note:If needed, you can turn Wi-Fi on from the watch control panel after pairing — your network info will already be saved -You will see that Wi-Fi will turn itself off. This is a battery saving feature.

The following video will provide the button basics for the RECKON.

Button Layout 

• Upper Right: Select / Start
• Lower Right: Back
• Upper Left: Up / Zoom In (Maps)
• Lower Left: Down / Zoom Out (Maps)
• To put your watch to sleep simply cover the screen with your palm 
• Wake your watch by pressing any external button or raising your wrist to as if you are looking at the screen

Apps: 

Access Apps from the home screen by swiping up.There you can view: 

• Activities including steps, intensive minutes, calories and progress on step goal
• Ballistics 
• Energy Index 
• Sleep 
• Heart Rate snapshot 
• Blood Oxygen
• Sunrise/Sunset 
• Weather 
• Altitude 
• Training Readiness 
• Barometer 
• V02 Max 
• HRV
• Alarm Clock 
• Message

Continue swiping to the end to access all apps and customize or rearrange app views.  

Widgets: 

Access Widgets from the home screen by swiping left. There you will view: 

• Goal progress for active calorie burn, steps and intensive minutes. 
•  heart rate trends
• Steps per day trends 
• Sleep data 
• Altitude chart trends 
• Barometric Pressure 
• Continue swiping to the end to manage widgets. 

Control Panel 

Access the Control Panel from the home screen by pressing the Back button. 

In the control panel you can access:

• Bluetooth
• Wi-Fi
• Do not disturb
• Vibration 
• Sound 
• Red Shift 
• Battery Modes 
• Watch Face 
• Alarm Clock 
• Touch On/Off 
• Flashlight 

Select to turn on, Utilize the lower left button to select color and brightness. To turn off you can select on screen or select the back button 

All Settings: Here you can edit and rearrange tiles

Notifications:

• Access notifications from the home screen by swiping down. 

PAIRING INSTRUCTIONS: 

First — if you haven’t already, download the app:

Android: https://play.google.com/store/apps/details?id=com.bridgerwatch.app&pcampaignid=web_share

iOS: https://apps.apple.com/us/app/bridger-watch/id6747764502

Quick note on setting up your account: Currently, there are two small tricks you need to know.

Answer to question 4 goes here.

Answer to question 5 goes here.

Answer to question 6 goes here.

Answer to question 7 goes here.

Answer to question 8 goes here.

Answer to question 9 goes here.

Answer to question 10 goes here.